PS_Airtool 6.0L IPR Air Test Tool (Compatible with Ford Powerstroke)

Each year Motor Magazine selects the Top 20 most innovative new tools in the automotive industry. We are pleased to announce that the 6.0L IPR Air Test Tool (which is compatible with Powerstroke / Ford from 2003 - 2010) was selected to receive this highly coveted award for 2014. THE PROBLEM: One of the more common issues plaguing 6.0L owners are hard hot-start issues. These issues are almost invariably caused by leakage in the engine's high pressure oil system which operates the fuel injectors. Possible leakage locations include the high pressure oil pump itself, IPR Valve, STC fitting, branch tubes, standpipes, dummy plugs, oil rail ball tube o-rings, injector inlet seals, etc. If the leak or combination of leak sources is bad enough to prevent the system from building the 520 PSI required, the truck will not start under any condition - hot or cold. Locating the exact source of the leak(s) is the challenge. OUR SOLUTION We have teamed with an innovative local company to bring you a new and improved method of locating these troublesome leaks. Our tool takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected. WARNINGS - As with any air tool, you will need to add your own air line quick-connect fitting. Since there are so many various air fitting in use, it is impractical to provide this part. - It is strongly advised to avoid cranking the engine with this tool connected. Since the IPR valve is not in place to provide pressure relief, the high pressure oil pump would effectively be dead-headed and pump, system, tool, or personal damage could result. - Auto repair activities are hazardous. Always wear protective eye-wear. This tool is intended for usage by trained professionals. By using it you are certifying that you have the necessary skills and training to do so safely.

• Winner of the Prestigious Motor Top 20 Tools Award 2014
• Replaces the IPR valve and allows the entire high pressure oil system to be checked for leaks in under 20 minutes
• 6.0L owners can eliminate hot-starting problems and save thousands in repair bills with this tool
• Allows systems with the latest updated standpipes to be tested
• No Scan Tool or IPR Driver Required / PATENT PENDING