HGM180HC Auto Start Stop Engine Control Module Diesel Genset Controller Generator Accessories

Electronic Engine ControlHGM180HC Auto Start Stop Engine Control Module Diesel Genset Controller Generator AccessoriesProduct DescriptionThe HGM180HC generator set controller is a self-starting module. Three working states can be selected by the electric lock. The generator set can be started manually by touching the button on the panel, or the generator set can be automatically started by remote signal input, and the fault can be detected (Low oil pressure, high water temperature/cylinder temperature, external alarm, overspeed) automatically cut off the fuel relay and shut down the electromagnet to be electrified. The panel LED indicates the fault status and provides a true and effective fault alarm signal.Performance and characteristics:Wide DC power input rangeWith low oil pressure, high water temperature/cylinder temperature, overspeed protection and indicationWith charging failure warning indication, no shutdownAn additional external input alarm shutdown signalThe speed signal is taken from the generating frequencyLED display various alarm status display with operating hours meterWith fuel output, start output, preheat output, shutdown output, public alarm/idling output functions, all of which are relay outputWith idle speed control function, idle delay time is programmablePreheating delay time is programmableThe conditions for successful start can be oil pressure + power generation ( default), or only power generationWhen the dial switch is set to idling/high-speed valid, the output port can be configured as idling/high-speed output, otherwise it is public alarm output.Modular structure design, ABS plastic shell, embedded installation method, compact structure, small size, advanced single-chip control, stable performance and convenient operationThe main technical parameters:DC power supply: 8-35VPower generation input: AC15-300V(+20%) 50 or 60Hz programmableOverspeed threshold: 114% of rated frequencyStarter separation: generator voltage 15VAC and frequency 15HzCharging failure voltage: less than 3VIdle time: the default is 10 secondsRemote power-on input judgment time: 2 secondsRemote shutdown input judgment time: 10 seconds5 output ports: 1A current, DC power supply B+ relay output4 switch input ports: connect to B- effectiveHour meter: maximum display time 99999.9 hoursWorking temperature: -30-+70Power consumption: standby (12V: 0.12W, 24V: 0.24W), normal operation (12V: 0.5W, 24V: 1W)Appearance size: 84x72x35mmWeight: 0.2KgTERMINALS FUNCTIONTerminal 1 (B-): Connected to plant battery negative.Terminal 2 (B+): Connected to plant battery positive.Terminal 3 (Fuel Output): Fuel Output (B+), Connected to fuel relay.Terminal 4 (Start Output): Start Output (B+), Connected to start relay.Terminal 5 (Pre-heat Output): Pre-heat Output (B+).Terminal 6 (Aux. Shutdown Input): auxiliary shutdown alarm input, connect to B- active.<;3V), annunciator on the panel illuminates. (indication only, not shutdown)Terminal 8 (Low Oil Pressure Input): Low Oil Pressure Input port, connect Bactive.Terminal 9 (High Engine Temp input): High water/cylinder temperature input port, connect to B- active.Terminal 10 (L), 11(N): Connect to AC voltage signal for detecting crank disconnect and over speed protection.Terminal 12 (Config. Output): Config. Output (B+), can be set as idle/high speed output or common alarm via dial switch of the controller.Terminal 13 (Stop Output): Energize to stop (ETS) (B+).Terminal 14 (Remote Start Input): Remote start input port,connect to B- active.==========Model Number : HGM180HCProduct Name : HGM180HCKeyword : Diesel Generator ControllerUsage : Auto Start Control Panel

• Electronic Engine Control
• HGM180HC Auto Start Stop Engine Control Module Diesel Genset Controller Generator Accessories