1pc W3230 DC12V/24V AC10-220V Probe Line 20A Digital Temperature Control LED Display Thermostat with Heat/Cooling Control Instrument(AC 110-220V)

Temperature ControllersW3230 DC12V/24V AC10-220V Probe Line 20A Digital Temperature Control LED Display Thermostat with Heat/Cooling Control InstrumentFeatures:The high-brightness digital tube clearly displays, whether it is used during the day or at night, it can be read clearlyThe sensor can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at willABS material shell, exquisite and beautiful, high mechanical strength, good electrical performance-50~120 ultra-wide temperature control range, can be used in various temperature control fields, 0.1 temperature control accuracy, to meet your control needsWiring input and output design, more convenient to use in various industrial control equipmentSpecifications:Supply voltage: 12V/DC 24V/AC 110V~220VTemperature control range: -55~120Temperature control accuracy: 0.1Hysteresis accuracy: 0.1Refresh rate: 0.32sOutput: 1-way relayEnvironmental requirements: -10~60 Humidity: 20%-85%Probe type: NTC10K/B3950,Size: 79mm*43mm*26mmInstructions for Use:Indicator status: flashing means cooling or heating start delay, steady light means the relay is closed, no light means the relay is disconnected. If the delay is turned on, during the delay , the light flashes and the relay is in the disconnected state.Digital tube: The PV digital tube is a red display digital tube, and the displayed value is the actual temperature value tested. When an abnormality occurs, the corresponding abnormal sign is displayed, and "LLL" is displayed as the sensor open-circuit display code, and "HHH" is displayed for the forced disconnection of the relay. The display code means that the measured temperature exceeds the maximum measurement range of the product. The thermostat will forcibly disconnect the relay, and the display "---" is the high temperature alarm display code after the high temperature alarm is set and the set maximum value is exceeded.The SV digital tube is a blue display digital tube, and the displayed value is the on-off temperature value of the relay. After pressing the "SET" button, the digital tube flashes. At this time, you can use the up arrow "" and the down arrow " " to make the value. Addition and subtraction.Main menu setting: Press and hold the "SET" button for 3s to enter the main menu setting, continue to press "SET" to switch the P0-P8 mode, press the up arrow "" and the down arrow " " to set the corresponding mode. Long press the "SET" button for 3 seconds, or no button action within 8 seconds will automatically confirm the .Switch: Press and hold "Restart" for 1.5s to turn off the display and relay, and press "Restart" again for 1.5s to turn on the display.Package Included:W3230 Thermostat X1==========Is Smart Device : NoUse : HouseholdDisplay Size : 1.9 Inches & UnderSupply voltage : 12V/DC 24V/AC 110V~220VTemperature control range : -55~120Temperature control accuracy : 0.1Hysteresis accuracy : 0.1Refresh rate : 0.32sOutput : 1-way relayWorking humidity : 20%~85%Operating temperature : -10~60Probe type : NTC10K/B3950Size : 79mm*43mm*26mm

• Temperature Controllers
• 1pc W3230 DC12V/24V AC10-220V Probe Line 20A Digital Temperature Control LED Display Thermostat with Heat/Cooling Control Instrument